MIET_counter/tmp/labanal/lab2_9/Schematic1.out.1
2024-03-19 14:36:36 +03:00

132 lines
3 KiB
Groff
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

**** 03/17/24 17:10:08 ****** PSpice 16.5.0 (April 2011) ****** ID# 0 ********
* C:\Users\vmuser\Desktop\Documents\counter\tmp\labanal\lab2_9\Schematic1.sch
**** CIRCUIT DESCRIPTION
******************************************************************************
* Schematics Version 16.5.0
* Sun Mar 17 17:09:58 2024
.PARAM R=8.3k
** Analysis setup **
.DC LIN V_V4 -5 5 0.01
.OP
* From [PSPICE NETLIST] section of C:\Cadence\SPB_16.5\tools\PSpice\PSpice.ini:
.lib "nom.lib"
.INC "Schematic1.net"
**** INCLUDING Schematic1.net ****
* Schematics Netlist *
R_R2 100 $N_0001 1k
R_R1 100 $N_0002 100
M_M1 $N_0003 $N_0003 $N_0001 100 nekt
+ L=0.5u
+ W=15u
M_M2 $N_0004 $N_0003 $N_0002 100 nekt
+ L=0.5u
+ W=15u
R_R3 $N_0003 0 { R }
V_V4 $N_0004 0 DC 5
V_V2 100 0 DC -50m
**** RESUMING Schematic1.cir ****
.PROBE V(*) I(*) W(*) D(*) NOISE(*)
.END
**** 03/17/24 17:10:08 ****** PSpice 16.5.0 (April 2011) ****** ID# 0 ********
* C:\Users\vmuser\Desktop\Documents\counter\tmp\labanal\lab2_9\Schematic1.sch
**** MOSFET MODEL PARAMETERS
******************************************************************************
nekt
NMOS
LEVEL 3
L 100.000000E-06
W 100.000000E-06
LD 100.000000E-15
WD 233.477900E-09
VTO .764085
KP 125.935500E-06
GAMMA .548356
PHI .7
LAMBDA 0
RSH 7.513418E-03
IS 10.000000E-15
JS 0
PB .914038
PBSW .914038
CJ 425.844700E-06
CJSW 314.746500E-12
MJ .435903
MJSW .197769
CGSO 215.000000E-12
CGDO 215.000000E-12
CGBO 100.000000E-12
NSUB 100.000000E+15
NFS 1.000000E+12
TOX 14.000000E-09
XJ 300.000000E-09
UO 662.6984
UCRIT 10.000000E+03
VMAX 144.222800E+03
DELTA 3.054118
THETA .1014
ETA 3.162045E-06
KAPPA .3
DIOMOD 1
VFB 0
LETA 0
WETA 0
U0 0
TEMP 0
VDD 5
XPART 0
ERROR -- Convergence problem in DC sweep
Last node voltages tried were:
NODE VOLTAGE NODE VOLTAGE NODE VOLTAGE NODE VOLTAGE
( 100) -.0144 ($N_0001) -.0144 ($N_0002) -.0932
($N_0003)-8.616E-09 ($N_0004) -1.4437
These supply currents failed to converge:
I(V_V4) = 10.00GA \ 10.00GA
I(V_V2) = -10.00GA \ -10.00GA
**** Interrupt ****