Coordinate checks in `spline_under_mouse_get` need to take place with
the evaluated mask to get the right center. This is now more in line to
how this is done in `ED_mask_point_find_nearest`.
Note: similar issues are reported with box/circle/lasso selection in
T97135, will tackle these separately though.
Maniphest Tasks: T85467
Differential Revision: https://developer.blender.org/D14598
Box, Circle and Lasso select were not taking into account if a
mask(point) was parented; selection was only succeeding in the original
place.
Now check coordinates from evaluated mask (points) instead while
setting selection flags and DEG tagging still happens on the original ID.
Maniphest Tasks: T97135
Differential Revision: https://developer.blender.org/D14651
Extremely subttle bug that would only appear in some specific
circumstances, would cause memfile undo writing code to falsely detect
some ID as changed because it would get the wrong 'starting point' of
comparison with existing previous memfile step.
See T85756 for detailed explanation and reproducible case.
Particles baked into memory would never load the final frame because
of an off-by-one error calculating the particles `dietime`.
This value indicates the frame which the particle ceases to exist but
was being set to the end-frame which caused this bug as the scenes
end-frame is inclusive.
While the last frame was properly written and read from memory,
the `dietime` was set to the last frame causing all the particles to be
considered dead when calculating the cached particle system.
Caused by rBc0bd240ad0a1.
To avoid crash, make boolean value false if active object data is NULL.
Should be backported to 2.93 LTS and 3.1 corrective releases.
Allow the user to set an anisotropic filtering setting below the implementation-defined value of `GL_MAX_TEXTURE_MAX_ANISOTROPY_EXT`.
This bug-fix is also needed for 2.93 LTS.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14392
When rendering using the command line the curvature wasn't rendered. The reason
was that the ui_scale wasn't initialized and therefore the same pixels where
sampled to detect the curvature. This is fixed by setting the ui_scale to 1 for any
image render.
Add check for `NULL` `from` pointer to `BLO_main_validate_shapekeys`,
and delete these shapekeys, as they are fully invalid and impossible to
recover.
Found in a studio production file (`animation
test/snow_parkour/shots/0040/0040.lighting.blend`, svn rev `1111`).
Would be nice to know how this was generated too...
This does not happen with **any** image, but with images that have ID
properties.
ID properties are used to store view projection matrices (e.g. for
reprojection with `Image from View` or `Quick Edit` -- these are the
ones we are interested in), but of course they can be used for anything
else, too. The images in the file from the report have ID properties from
an Addon for example.
So the crash can reliably be reproduced with **any** image doing the
following:
```
bpy.data.images['myImage']['myIDprop'] = "foo"
```
This would lead code in `texture_paint_camera_project_exec` to think the
needed `view_data` is on the image (but in reality it was just some
other IDprop).
Solution is simple: just check `view_data` is really valid after getting
it from the IDprops.
Maniphest Tasks: T95787
Differential Revision: https://developer.blender.org/D14116
Fix T95601: Missing handling of keyingsets ID pointers in lib_query/foreach_id code.
This will have to be backported to 2.93 and possibly 2.83 if possible.
The direct cause of the bug in question was passing in the raw memory
buffer to sscanf. It should be called with a null-terminated buffer;
which isn't guaranteed when blindly trusting the file data.
When attempting to fuzz this code path, a variety of other crashes were
discovered and fixed.
Differential Revision: https://developer.blender.org/D11952
Regression in 51befa4108
caused negative values to overflow into a uint64_t.
Resolve by casting to a signed int from originally signed types.
This caused D14033 not to work properly.
Assign the actual value before casting to large uint64_t/double types.
This improves readability, especially in cases where both pointer
and integer casts were used in one expression, to make matters worse
clang-format treated these casts as a multiplication.
This also made debugging/printing the values more of a hassle.
No functional changes (GCC produced identical output).
For boolean operations only one of the meshes was checked to determine
if bevel weights should be created.
Now initialize custom data from both meshes flag.
Note that this is a localized fix to be back-ported, further changes
will be made so edit-mode conversion accounts for this
without the caller needing explicit checks for custom-data flags.
2-point-curves are treated separately from 3plus-point-curves (assume a
lot of the twisting reduction can be skipped, so there is a dedicated
function for single segment curves).
And while using the 3plus-point-curves function [`make_bevel_list_3D`]
would actually work in this case, the dedicated function
`make_bevel_list_segment_3D` would only consider the tilt of the second
point and would just copy over the quat to the first point as well. Dont
see a reason for this, now consider the first point's tilt as well.
Maniphest Tasks: T94837
Differential Revision: https://developer.blender.org/D13813
Audio PTS was reset for each new file. This caused misalignment of video
and audio streams. In Blender, these files can't be loaded, other
players will fail to align audio and video.
Since timestamps are reset intentionally, reset also video stream
timestamps.
There were other bugs:
After timestamp was reset for audio, write_audio_frames started
encoding from timeline start until target frame, so each split video
had more audio than it should.
Also audio for last frame before splitting was written into new file.
Differential Revision: https://developer.blender.org/D13280
After disconnecting hair on an object, if you then hide the particle system, and try connecting the hair again, the operator is cancelled due to `remap_hair_emitter` returning `false` because `target_psmd->mesh_final` is NULL, but `connect_hair` will still strip the `PSYS_GLOBAL_HAIR` flag, which will cause the hair in the hidden particle system to be positioned incorrectly. The correct behavior is to strip the flag only if `remap_hair_emitter` succeeds.
Differential Revision: https://developer.blender.org/D13703
Add a data boundary check in the flipping code.
This code now also communicates the number of mipmap levels
it processed with an intent to avoid GPU texture from using
more levels than there are in the DDS data.
Differential Revision: https://developer.blender.org/D13755
Fix IMB_flip[xy] to handle cases where integer overflow might occur when
given sufficiently large image dimensions.
All of these fixes were of a similar class where the intermediate
sub-expression would overflow silently. Widen the types as necessary.
Differential Revision: https://developer.blender.org/D13744
Fixes a bug introduced in rB5dedb39d447b. `mesh_original` is not set if the
mesh has no generative modifiers, in which case we can use `mesh_final`, which
would seem to be consistent with the rest of the particle code. An alternative
approach would be to make sure that `mesh_original` is always set in
`deformVerts`.
Differential Revision: https://developer.blender.org/D13754
Take the Use Modifier Stack setting into account when connecting hair, and
fix wrong results results when using deforming modifiers also.
Differential Revision: https://developer.blender.org/D13704
The eraser checks the current, previous and next point (and sets pc0,
pc1 & pc2 corresponding to that for futher occlusion/brush/clipping
checks). For the very first point, it sets pc0 to pc1 [which makes sense,
there is no previous point, so we should assume the previous segment is
"visible" as soon as the first point is], but does so *before* pc1 is
even calculated. This makes following occlusion/brush/clipping checks
work with zero values [which leads to no earsing in most cases].
Now *first* calculate pc1, *then* set pc0 to pc1.
Maniphest Tasks: T94137
Differential Revision: https://developer.blender.org/D13593
Sculpt Smooth in Surface mode (as opposed to Laplacian) needs a cache
initialized on first time. In anchored stroke mode with spherical falloff
this was skipped though (because this starts of with no PBVH nodes and
an early return checks for this) and `first_time` was set to false before
cache initialization.
Now move the cache initalization to happen earlier (same as the cache
initialization for automasking).
Maniphest Tasks: T94635
Differential Revision: https://developer.blender.org/D13746
Oversight in {rB9cb5f0a2282a}.
Above commit made an entry in `rna_Space_refine()`, but the entry in
`rna_Space_refine_reverse()` was missing (and this is what python uses
for the Space callbacks).
Maniphest Tasks: T94685
Differential Revision: https://developer.blender.org/D13751
If a mirror object is used in a mirror modifier, sculptmode did not take
this into account (and instead always clipped on the sculpt objects
local axis).
Now take this into account by storing a matrix in the preparation
function `sculpt_init_mirror_clipping` and use that later in
`SCULPT_clip`.
Maniphest Tasks: T94564
Differential Revision: https://developer.blender.org/D13711
Just an oversight in rBe9607f45d85d.
Now add notifier that toolsettings changed.
Maniphest Tasks: T94366
Differential Revision: https://developer.blender.org/D13723
Since 2.8, background images are tied to cameras (in 2.79 these were
tied to a View3D I think).
Code in `BKE_library_id_can_use_idtype` wasnt taking this relation
between `Camera` and `Image` into account, thus leading to ID deletion/
unlinking not working properly -- in particular `libblock_remap_data`
not doing its thing (and leaving the camera as a user of the image),
then things went downhill from there...
Now make the "Camera-can-use-an-Image" relation clear in
`BKE_library_id_can_use_idtype`.
Maniphest Tasks: T94544
Differential Revision: https://developer.blender.org/D13722
This was visible outside of camera view and was not respecting the
"Depth of Field" checkbox on the Camera properties.
Now return early if DoF should not be visible.
Maniphest Tasks: T94262
Differential Revision: https://developer.blender.org/D13631
The array modifier does not necessarily tag normals dirty.
If it doesnt, normals are recalculated "internally" using the offset ob
transform. This was happening for the array items, but not for the caps.
Now do the same thing for caps.
Maniphest Tasks: T94422
Differential Revision: https://developer.blender.org/D13681
Issue was caused by adding `seq->sound` check in ded68fb102 in
function `BKE_sound_scene_add_scene_sound` as `offset_time` field was
introduced to resolve sub-frame a/v misalignment.
Scene strips don't have `bSound` allocated but also don't suffer from
a/v misalignment.
Remove `seq->sound` check and don't apply any offset for scene strips.
Reviewed By: zeddb, sergey
Differential Revision: https://developer.blender.org/D12819
Operator was erroneously starting edge_slide operation.
Revert part of the changes in rB3fab16fe8eb4 as obedit_type was being
confused with object_mode.
Just disable these tests on macOS for now as fixing seems hard, and we want to
be able to cross-compile and test x86_64 on Arm machines on the buildbot.
