This breaks backwards compatibility some in that 3 sides will be mapped
differently now, but difficult to avoid and can be considered a bugfix.
Similar to rBdd8016f7081f.
Maniphest Tasks: T103615
Differential Revision: https://developer.blender.org/D16910
Likely uncovered by 6c97c7f767, the actual mistake would be from
6942dd9f49.
The hacks to display text buttons for renaming in UI-Lists used the emboss of
the text button for handling logic. It relied on the emboss `NONE` but we also
introduced `NONE_OR_STATUS` with 6942dd9f49. Both values need to be treated
equally for the logic of this hack to work.
The change in `interface_layout.c` is actually not needed for this exact issue,
but it's the correct thing to do. There may actually be more cases where `NONE`
and `NONE_OR_STATUS` need to be treated equally. Something to be checked still.
Overlay relationship lines were missing between the object having the
modifier and the target object.
To make this consistent with other objects types, now draw relationship
lines for greasepencil and hooks now, too.
Spotted while looking into T102741.
Maniphest Tasks: T102741
Differential Revision: https://developer.blender.org/D16609
Brush cursors were missing when opening a file saved in sculpt/vertex-/
weightpaint mode.
Since we dont do a full modeswitch on file load in `ED_editors_init` for
grease pencil since rBde994d6b7b1c, we were missing the brush cursor
toggling [`ED_gpencil_toggle_brush_cursor`] normally done in
`ED_gpencil_setup_modes`.
This is now explicitly added for any greasepencil paintmode (in case
object is active).
Maniphest Tasks: T102685
Differential Revision: https://developer.blender.org/D16603
Caused by rB85f90ed6fd88.
Above commit made sure whole strokes are selected when the
GP_SELECTMODE_STROKE is used in different modes, but ignored the fact
that this can also already be set by the entire_strokes select operator
property.
This is now corrected.
Differential Revision: https://developer.blender.org/D16576
If compositing uses renderlayers, and a camera was missing in the
associated scenes, the error message also referred to the scene the comp
tree was in (not the scene of the renderlayer -- which can potentionally
be different).
This was confusing and is now rectified.
Maniphest Tasks: T102514
Differential Revision: https://developer.blender.org/D16542
After rB716ea1547989 the UV overlay is no longer displayed in
the UV Editor. It only appears for the Image Editor.
So restore the previous behavior, displaying the "UV shadow"
overlay in the UV editor as well.
Reviewed By: Jeroen Bakker, Germano Cavalcante
Maniphest Tasks: T92614, T100926
Differential Revision: https://developer.blender.org/D16490
`DeviceManager.h` uses `std::string` without explicitly including
the `<string>` header. While older MSVC implicitly included this
header somewhere, the headers for 17.4+ do not leading to a build
error.
Rotation and scale was done around the wrong center (always around mouse
position) in paint_draw_tex_overlay [on the other hand,
paint_draw_cursor_overlay already got the center right].
Now make the center dependent on UnifiedPaintSettings "draw_anchored".
Maniphest Tasks: T102312
Differential Revision: https://developer.blender.org/D16418
The color-band needs to do some special, rather awkward updating of the
UI state when certain values are changed. As @lichtwerk noted in the
report, this was done to the wrong buttons. Now lookup the proper
buttons, and don't assume that `uiItemR()` only adds a single button
(which often isn't the case).
The operator was acting on non selected items (wasnt checking SpaceFile
bookmarknr for being -1) which could end up removing items even.
Now sanatize this by introducing proper poll (which returns false if
nothing is selected).
Fixes T102014.
Maniphest Tasks: T102014
Differential Revision: https://developer.blender.org/D16385
This led to the color actually looking different on the node body itself
vs. in the panel, also using the colorpicker gave unexpected results.
UI colors should use PROP_COLOR_GAMMA to avoid being affected by scene
color management (clarification by @brecht).
Maniphest Tasks: T99603
Differential Revision: https://developer.blender.org/D16334
During teleport event, gravity is disabled and WalkMethod
is stored in `teleport.navigation_mode` which is used later to reset
the status after execution. Calling teleport events consecutively
will change the initial WalkMethod value. So update it only on the
first call. Also remove `else condition` as it stops the previously running
teleport when the new teleport call fails to find a hit point.
Reviewed by: dfelinto, mano-wii
Differential Revision: https://developer.blender.org/D15574
Passing `emboss=False`set `UI_EMBOSS_NONE` in the layout, which
completely disables button background colors for things like animation
state. This commit changes that to `UI_EMBOSS_NONE_OR_STATUS`,
which effectively restores the behavior to what it was prior to the
addition of that flag, with the added option to completely disable
the status emboss with `UI_EMBOSS_NONE`.
If multiple bones have a custom property with the same name,
depsgraph didn't distinguish between them, potentially leading
to spurious cycles.
This patch moves ID_PROPERTY operation nodes for bone custom
properties from the parameters component to individual bone
components, thus decoupling them.
Differential Revision: https://developer.blender.org/D13729
Due to (optimization) checks in in `BKE_gpencil_prepare_eval_data` &
`BKE_gpencil_update_layer_transforms`, updates were skipped if animation
reached exact identity transforms.
Now check if the matrix has changed additionally to gain proper updates.
Unsure if this is the cheapest way to check for the animated state of
layer transforms tbh, but I see similar checks elsewhere.
Fixes T101164.
Maniphest Tasks: T101164
Differential Revision: https://developer.blender.org/D16018
Whenever animation on nodes was transfered to/from nodegroups (grouping/
ungrouping/separating) via BKE_animdata_transfer_by_basepath, it was
possible to create new nodes with the same name (in the formerly same
path -- see report for an example of this) and animation from the
original node was still performed on them. Issue went away after save/
reload.
In order to fully update the action, a depsgraph is now performed on the
action (similar to what is done when renaming for example).
Maniphest Tasks: T101109
Differential Revision: https://developer.blender.org/D15987
Following {T54811} (and {rBbb92edd1c802}), DEG updates have been added
to the various operators. This has also been done for the layers
operators (see {rBf998bad211ae}, `ARMATURE_OT_bone_layers` has been
marked done in T54811). However, instead of `ARMATURE_OT_bone_layers`,
the update tagging actually happened for `POSE_OT_bone_layers`.
Now do this for `ARMATURE_OT_bone_layers` as well (keep it for
`POSE_OT_bone_layers`, dont think this is wrong there either).
Maniphest Tasks: T101046
Differential Revision: https://developer.blender.org/D15969
This was caused by the vertical/horizontal clasification being done in
NDC space which wasn't respecting the Aspect ratio.
Multiplying the test vector by the target size fixes the issue.
Clear delta transform value after applying transform.
Include delta location while applying transform.
Use `copy_v3_fl` for resetting object scale
Reviewed By: mano-wii
Maniphest Tasks: T99070
Differential Revision: https://developer.blender.org/D15270
special_aftertrans_update would always use TransInfo values (not
the values_final -- we need the final values to follow numinput, snapping,
etc).
Maniphest Tasks: T100851
Differential Revision: https://developer.blender.org/D15893
This was the case when the "Show in Editmode" option was used and a
vertexgroup affected the areas.
Probably an oversight in {rBdeaff945d0b9}?, seems like deforming
modifiers always need to call `BKE_mesh_wrapper_ensure_mdata` in
`deformVertsEM` when a vertex group is used.
Maniphest Tasks: T100578
Differential Revision: https://developer.blender.org/D15756
The stroke points were changed but the bounding box calculation was not
done and this produced a problem in any bounding box check done by
different tools.
Crash would happen when a linked ID would become missing, that was
'pre-declared' and used only once as a 'weak link' in another library
stored before the one it came from.
In that case, the place-holder generated in read code would be freed in
read_library_clear_weak_links, when handling its 'owner' library, but
since all previous libraries in the list had already been 'lib_linked'
and their filedata (and related libmap) freed, the update of the libmaps
in read_library_clear_weak_links would not apply to data from those
previous libraries, leading to ID pointers there pointing to freed
memory.
This fix should also be backported to 2.93.
Any script that raised a SystemExit called by --python, --python-expr
command line args or by executing the text block would exit without
printing a message. This caused the error from T99966 to be hidden.
Add explicit handling for SystemExit to ensure the message is always
shown before exiting.
More details noted in code-comments.
`BLENDER_VERSION_DOTS` has changed since 2.93, in that version of the
codebase it cannot be used directly to get directory in the API doc
matching Blender version.
Many thanks to the original Author of this patch: Christian Aguilera
The COLLADA importer was silently ignoring the alpha component in the
vertex data.
The `stride` variable holds the component count (3 for RGB; 4 for RGBA),
and can be used for honouring the alpha channel in the vertex data.
Test plan:
- Open Blender.
- Clear the scene.
- Add a plane.
- Enter **Vertex Paint** mode.
- Switch to the **Erase Alpha** blending mode.
- Select a tone of gray.
- Turn strength down to less than 1
- Paint [some of] the vertices of the plane.
- Export project as a COLLADA file (`.dae`).
- Clear the scene.
- Re-import the COLLADA file again.
- Export the project again (with different name).
**Without** this patch, the second exported project will have lost the
alpha component in their vertex data:
```lang=xml, counterexample
<float_array id="Plane-mesh-colors-Col-array" count="24">1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1</float_array>
```
**With** the patch, the first and the second exported projects retain
the alpha values painted previously:
```lang=xml
<float_array id="Plane-mesh-colors-Col-array" count="24">1 1 1 1 1 1 1 0.5490196 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0.5490196</float_array>
```
Reviewed By: cristian64, SonnyCampbell_Unity
Authored by: Christian Aguilera
Differential Revision: https://developer.blender.org/D14246
Optionally use `sphinx_changelog_gen.py` to dump current version of the
API in a JSON file, and use closest previous one listed in given index
file to create a changelog RST page for Sphinx.
Part of {T97663}.
